Welcome to Shandong Huarun Steel Group Co., Ltd.
WhatsApp：+8613245370329 Email:grace@cnsdsteelgroup.com
PRODUCT CENTER
6063 aluminum alloy material. The main alloy elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy. 6063 aluminum alloy profile with its good plasticity, moderate heat treatment strength, good welding performance and anodic oxidation treatment, gorgeous surface color and many other advantages, is widely used in building profiles, irrigation pipes, for vehicles, platforms, furniture, elevators, fences and other tubes, bars, profiles.
1100 aluminum alloy is 99.0% ordinary industrial pure aluminum. Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance; After anodic oxidation, the corrosion resistance can be further improved and a beautiful surface can be obtained. 1100 aluminum alloy is formed by adding a small amount of copper element in pure aluminum, with excellent forming characteristics, high corrosion resistance, good weldability and electrical conductivity. Widely used in products requiring good formability and high corrosion resistance, but not high strength requirements.
The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect. Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
2024-T3aluminum alloy can be significantly improved after heat treatment. 2024 is a typical duralumin alloy in the aluminum-copper-magnesium system. It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance. Main applications: aircraft structure, rivets, truck wheels, propeller components and other structural parts.
6082-T6 aluminum, the main alloying elements in the alloy are magnesium and silicon, with excellent processing performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, coating, excellent anodic oxidation effect, is a typical extrusion alloy. Widely used in building profiles, irrigation pipes, pipes, bars and profiles for vehicles, platforms, furniture, elevators and fences.
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance. It also has moderate strength and can maintain good operability after annealing. It is mainly used in mechanical structure, including bars, plates, pipes and profiles. This alloy has similar but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
1070 H14 Aluminum Foil is widely used in food, drinks, cigarettes, medicines, photographic plates, household commodities, etc., usually used as packaging materials; Electrolytic capacitor material; Insulation materials for buildings, vehicles, ships, houses, etc.; It can also be used as decorative gold and silver thread, wallpaper and decoration trademarks of various stationery prints and light industrial products.
